Avaya Converged Platform 130 Series - Page 50

2. Go to Networking > Port Groups.
The Services standard port group should be created and assigned to vSwitch1.
3. Select
Services.
The Services vSwitch topology should display the following:
• VMkernel port (1): vmk1 should be configured with the 192.11.13.6 IP address
• Physical adapter is vmnic1.
• VLAN ID 0
4. Go to Networking > Virtual Services.
5. Select vSwitch1, and validate the following details:
• VMkernel port (1): vmk1 should be configured with the 192.11.13.6 IP address.
• Physical adapter is vmnic1
• VLAN ID 0
Configuration
October 2019 Installing the Avaya Converged Platform 130 Series 50
Comments on this document? infodev@avaya.com