MBOX Control Software Overview
29
Availability of some parameters is determined by whether the channel is mono or stereo, input type (mic, line, or instrument), and other
characteristics.
Channel Focus
Item Description
Channel Focus and Avid FX Tabs Selects Channel Focus or Avid FX view
Channel Focus Name Shows the name of the currently focused channel
Mic/Line/Inst Input Select Selects the input type (MIC/LINE/INST) for the currently focused Hardware Input
Z
Selects the impedance for the currently focused Hardware Input (see Mic and Instrument Imped-
ance Settings)
PAD button Enables a -10 dB pad for the currently focused Hardware Input
48V (Phantom Power) Enables +48V Phantom Power for the currently focused Hardware Input channel’s Mic input
Sft Lim (Soft Limiter) Enables a soft-knee compressor on the focused Hardware Input, to protect against clipping.
Ø (Polarity) Inverts the polarity (“flips the phase”) on the currently focused Hardware Input
Channel Fader Adjust the level of the input channel.
Meters - Mono and Stereo Displays input level for selected input channel.
MUTE Button Mutes (silences) the channel.
SOLO Button Solos the channel (silences all channel that are not also soloed)
AVID FX Send Level Adjusts how much level is sent to the AVID FX (XMOS) Reverb/Delay Return
AVID FX Send Meter Shows how much signal of selected input channel is being send to the AVID FX bus
AVID FX Send Pre/Post Fader When enabled, the pickoff point for channel send to AVID FX is pre-fader/input gain
EQ Section Provides 4-band parametric EQ
EQ Bypass Button Bypasses EQ for the selected channel.
EQ to DAW Button Sends the current input signal to Pro Tools with EQ processing.
Gain Sets mic preamp gain level of selected input.
Pan Available on mono channels only, places the signal in the stereo field left-to-right.
Offset Available on stereo channels only, sets the right channel gain offset.
Balance Available on stereo channels only, adjusts left-to-right stereo image.
Width Available on stereo channels only, adjusts stereo image width.
To Next Page
Loading...
Need help?
General
