Avid Technology MBOX STUDIO Guide

Using MBOX Studio
49
Bluetooth Output
MBOX Studio can be paired with other Bluetooth device for wireless audio input and output.
Bluetooth output always mirrors the
ALT mix.
To use Bluetooth output:
1 Make sure Bluetooth is enabled on the tablet, computer, or other receiving device.
2 Press and hold the Bluetooth button in the Output section for 2 seconds. The Bluetooth (output) button flashes blue.
3 Put your external Bluetooth speaker or headphones into Bluetooth pairing mode. When the connection is established the
MBOX Studio Bluetooth (output) button stops flashing and lights blue.
4 To disconnect Bluetooth press and hold the MBOX Studio Bluetooth (input) button for 2 or more seconds. Or turn off Bluetooth on
your source device.
Pairing MBOX Studio with a Bluetooth device (speaker, headphone, or other)
123 456
TUNE
48V LINK
INPT
ZPAD
LINK MONO
MUTE
DIM TALK
MIC LINE INST
INST
MAIN DIG ALT

Avid Technology MBOX STUDIO Specifications

General

Brand	Avid Technology
Model	MBOX STUDIO
Category	DJ Equipment
Language	English