Using MBOX Studio
48
Bluetooth Input
MBOX Studio can be paired with other Bluetooth devices for wireless audio input and output.
To use a Bluetooth source:
1 Make sure Bluetooth is enabled on the tablet, computer, or other source device.
2 Press and hold the Bluetooth button in the Input section for 2 seconds. The Bluetooth button flashes blue while waiting to be paired.
3 On the Bluetooth source device, select MBOX in its list of discovered connections (such as MBOX IN 84EF). When the connection
is established the MBOX Studio Bluetooth (input) button stops flashing and lights blue.
4 To disconnect Bluetooth press and hold the MBOX Studio Bluetooth (input) button for 2 or more seconds. Or turn off Bluetooth on
your source device.
Audio Output
Connect speakers and headphones to MBOX Studio (see Example Audio Connections). The following section shows how to select and
adjust audio outputs.
Main and Alt Monitor
Use the controls on the right side of the MBOX Studio top panel to focus and adjust outputs.
To select and adjust MAIN or ALT output from MBOX Studio:
1 Repeatedly press the right encoder until MAIN or ALT is selected. MAIN lights green and ALT lights yellow.
2 Rotate the right encoder, or the Monitor encoder on-screen, to adjust output volume.
3 Press MUTE or DIM to silence (Mute) or soften (Dim) the selected output.
Pairing MBOX Studio with a Bluetooth source device
Adjusting output level
123 456
TUNE
48V LINK
INPT
ZPAD
LINK MONO
MUTE
DIM TALK
MIC LINE INST
INST
MAIN
DIG
ALT
MBOX STUDIO
123 456
TUNE
48V LINK
INPT
ZPAD
LINK MONO
MUTE
DIM TALK
MIC LINE INST
INST
MAIN
DIG
ALT
MAIN
DIG
ALT
MAIN
DIG
ALT
MBOX STUDIO
To Next Page
Loading...
Need help?
General
