Avigilon 2.0C-H6SL-D1 User Manual

Installation Guide
Avigilon H6SL Camera Models:
2.0C-H6SL-D1 2.0C-H6SL-D1-IR 2.0C-H6SL-DO1-IR
3.0C-H6SL-D1 3.0C-H6SL-D1-IR 3.0C-H6SL-DO1-IR
5.0C-H6SL-D1 5.0C-H6SL-D1-IR 5.0C-H6SL-DO1-IR

Avigilon 2.0C-H6SL-D1 Specifications

General

Resolution	1920 x 1080
Day/Night Mode	Yes
Video Compression	H.264, MJPEG
Form Factor	Bullet
Weather Resistance	IP66
Sensor Type	CMOS
IR Range	Up to 30 m
Power Supply	PoE (802.3af), 12VDC
Mount	Ceiling, wall
Environment	Indoor/Outdoor
Minimum Illumination	0.01 Lux
Operating Temperature	-30°C to +50°C (-22°F to +122°F)

Summary

Important Safety Information

Preparing the Installation

Pre-Deployment In-Box Configuration

Surface Mount Installation

Using the Surface Mount Adapter

Mounting the Dome Camera Using the Bottom Cable Entry

Steps for mounting with cables entering from below.

Mounting the Dome Camera Using the Side Cable Entry

Steps for mounting with cables entering from the side.

Mounting the Dome Camera to an Electrical Box

Instructions for mounting to standard electrical boxes.

In-Ceiling Mount Installation

Using the In-Ceiling Mounting Adapter

Pendant Mount Installation

Mounting the Dome Camera to a Pipe

Instructions for mounting the camera to a pipe using the NPT adapter.

(Optional) Mounting the Dome Camera to the Pendant Wall Mount

Guide for mounting to a pendant wall mount.

Installing the Camera Base to the Mounting Adapter

How to attach the camera base to the pendant mount adapter.

Connecting to the Camera

Initializing a Camera Username and Password

Steps to create initial user credentials for the camera.

Assigning an IP Address

Aiming the Dome Camera

Installing the Dome Cover

Configuring the Camera

Connection Status LED Indicator

Troubleshooting Network Connections and LED Behavior

Removing the Dome Camera from the Mounting Adapter

Resetting to Factory Default Settings