Avigilon 2.0C-H6SL-D1 - Surface Mount Installation; Using the Surface Mount Adapter

Surface Mount Installation
Required Tools and Materials
The following tools are required to complete the installation but are not included in the package:
l
No. 2 Phillips screwdriver — for attaching camera to an electrical box or mounting surface.
Camera Package Contents
Ensure the package contains the following:
l
Avigilon H6SL Dome Camera (Indoor models)
o
Mounting template sticker
o
4 screws and anchors for solid walls
o
Surface mount adapter
o
Cable entry grommet
o
Side conduit cover
o
T20 Pin-In star-shaped driver
l
Avigilon H6SL Dome Camera (Outdoor models)
o
Mounting template sticker
o
4 screws and anchors for solid walls
o
Surface mount adapter
o
Side conduit cover
o
1/2" Side conduit plate
o
Conduit grommet
o
Cable entry grommet
o
T20 Pin-In star-shaped driver
Installation Steps
Complete the following sections to install the device.
Using the Surface Mount Adapter
The dome camera is provided with a surface mount adapter that can be mounted to a wall, ceiling or
electrical box.
If the dome camera needs to be installed in a different way, use one of the other mounting adapter options
and refer to their sections in this manual for more information.
Surface Mount Installation 17