(Optional) Installing the Microphone Accessory
Note:
If you have a Microphone accessory (ACMICR-1001), attach it to the camera's microphone port before
installing attaching the dome. This accessory is only compatible with Indoor models and should NOT
be installed with an external audio device.
1. Seat the Microphone Accessory into the microphone slot located on the front of the camera base.
Insert the Microphone Accessory's connector into the microphone port beside the I/Oconnector
block.
1. Pull the Microphone Accessory's wire around the hook as shown to hold it in place.
(Optional) Installing the Microphone Accessory 44
To Next Page
Loading...
Need help?
General
