Avigilon 2.0C-H6SL-D1 - Camera Base Bottom View; Cover View, Surface Mount

Camera Base Bottom View
1.
Cable entry hole
An entry hole for the cables required for camera operation.
2.
Lanyard anchor
The safety lanyard attaches to the anchor to prevent the camera from falling during installation.
3.
Vent
Vent to allow moisture vapor to escape the sealed housing and equalize pressure.
Cover View, Surface Mount
1.
Dome cover
Vandal resistant dome cover.
2.
Surface mount adapter
Used to mount the dome camera to a wall, ceiling or electrical box.
3.
Tamper resistant screws
Star-shaped captive screws to fix the dome cover to the mount adapter.
4.
Side cable entry cover
Covers the side cable entry hole.
Camera Base Bottom View 10