6. Using the buttons in the
PC mode
6.1 Installing Button Manager V2
Button Manager V2 provides you an easy way to scan your
document and then link the scanned image to your designated
software application. All this can be done by a simple touch of
the button on the scanner. Yet, before you scan, it is
recommended to check the button configurations first to
ensure a proper file format and a destination application.
6.2 Checking the Button Configurations before Scanning
1. Button Manager runs from the system tray. After Button
Manager and the scanner driver are properly installed,
Button Manager is started and the Button icon will be
displayed on the system tray at the bottom right corner of
your computer screen.
To Next Page
Loading...
