3. Installation & operation
in easy mode (SD/Flash
mode)
Precautions
• Keep the product out of direct sunlight. Direct
exposure to the sun or excessive heat may cause
damage to the unit.
• Do not install the product in a humid or dusty place.
• Place the product securely on an even, flat surface.
Tilted or uneven surfaces may cause mechanical or
paper-feeding problems.
• Retain the product box and packing materials for
shipping purposes.
To start instant scans from this scanner - to scan and save
your images to a SD card or a USB flash drive, you need to
first install and charge the battery. Follow these steps to
charge the battery from your computer.
Important:
Allow the battery to charge for at 6 hours. The battery
must be fully charged before using the scanner for the
first time.
Do not turn on the scanner power when charging the
battery.
To Next Page
Loading...
