Avision FF-1105B - 2 Scanner Overview; Front View

User’s Manual
2-1
2. Scanner overview
2.1 Front view
No. Name Function/ Description
1
Power LED and
Knob ( )
Move the knob to “1” ~
“5” to turn on and “OFF”
to turn off the scanner.
2
Scan or Custom
Button (
)
In “SD/Flash” Mode:
Press the button for 2
seconds to start
calibrating the scanner.
In “PC” Mode: Press to
start a scan.
3
Battery LED
( )
Indicate the battery
status.
Green LED: Indicates
the ready status.
Orange LED: Indicates
the power charging
status.
Red LED: Indicates the
power capacity is in low
status (about 20%).
4
3
1
2
5
1
2
3