EasyManua.ls Logo

AVS Electronics OUTSPIDER DT - TECHNICAL FEATURES

AVS Electronics OUTSPIDER DT
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 48 -
AVS ELECTRONICS S.p.a. reserves the right to make amendments at any moment and without notice.
The power supply must come from very low safety
voltage circuit with the characteristics of a limited
power source protected by a fuse.
Via Valsugana, 63
Curtarolo (Padova) ITALY
Tel. 049 9698 411 / Fax. 049 9698 407
avs@avselectronics.it
www.avselectronics.com
Technical Assistance:
support@avselectronics.it
141 138
242
OUTSPIDER PA OUTSPIDER DT
Maximum capacity 15 - 23 metres 15 - 23 metres
Recommended installation height from 1.00 to 2.70 mtfrom 1.00 to 2.70 mt
Environmental conditions -25°C ÷ +55°C -25°C ÷ +55°C
Dimensions (hxlxw) 242 x 141 x 138 242 x 141 x 138
Power supply nominal voltage 12 V 12 V
Minimum power supply voltage 10.5 V 10.5 V
Maximum power supply voltage 15 V 15 V
Absorption while quiet 53 mA 65 mA
Absorption during alarm 67 mA 77 mA
Infrared channels for individual sensor 9 doubles 9 doubles
Signal emitted by microwave - by impulse
Frequency - 10.525 GHz
Irradiated RF power (EIRP) - 14 dbm
Alarm output 1 (C/NC) 1 (C/NC)
Tamper output 1 (C/NC) 1 (C/NC)
Antimask output 1 (C/NC) 1 (C/NC)
Relay contacts capacity 12 V 500 mA 12 V 500 mA
F output (Dirty lenses) yes yes
AUX input for remote sensor or
tamper
for remote sensor or
tamper
Block input yes yes
Compensazione termica yes yes
Walk Test optic: LED
acoustic: buzzer
optic: LED
acoustic: buzzer
Infrared cover lenses 4 4
Protection rating IP 65 IP 65
TECHNICAL FEATURES
E
N
G

Table of Contents

Related product manuals