14
3. In Sequence, enter 1.
4. In Description, enter Unlock door.
5. In Accounts, select the SIP account.
6. Click Save.
Set up the door station to unlock the door using the internal relay
7. Go to System > Events > Rules and add a rule.
8. In the Name field, enter DTMF unlock door.
9. From the list of conditions, under Call, select DTMF and Unlock door.
10. From the list of actions, under I/O, select Toggle I/O once.
11. From the list of ports, select Relay 1.
12. Change Duration to 00:00:07, which means that the door is open for 7 seconds.
13. Click Save.
Transmit live video to a monitor
Your device can transmit a live video stream to an HDMI monitor without a network connection. Use the
monitor to see who is at the door.
1. Connect an external monitor to the HDMI connector.
2. Adjust the HDMI settings in System > Video out.
Allow credential holders to open the door
With Entry list, you can make it possible for credential holders to use their card or PIN to trigger actions, such as
opening a door. This example explains how to add a credential holder who can use their card to open the door
10 times.
Prerequisites
• Make sure the correct chip type is active in Reader > Chip types.
Turn on Entry list and add a credential holder:
1. Go to Reader > Entry list.
2. Turn on Use Entry list.
3. Click + Add credential holder.
4. Enter the credential holder's first and last name. The first name must be unique.
5. Select Card.
6. Swipe the credential holder's card on the device and click Get latest.
7. Keep the event condition Access granted.
8. Under Valid to, select Number of times.
9. In Number of times, enter 10.
10. Click Save.
Create a rule:
1. Go to System > Events.
2. Under Rules, click + Add a rule.
3. In Name, enter Open door.
4. In the list of conditions, select Entry list > Access granted.
5. In the list of actions, select I/O > Toggle I/O once.
6. In the list of ports, select Door.
AXIS A8207-VE Mk II Network Video Door Station
To Next Page
Loading...
