71
– Border color: Select a border color.
• Main view
– Source: Select the camera that will stream on the full display.
– Rotate image 180°: Click to rotate the image.
– Mirror image: Click to flip the image.
Accessories
I/O ports
Use digital input to connect external devices that can toggle between an open and closed circuit, for example,
PIR sensors, door or window contacts, and glass break detectors.
Use digital output to connect external devices such as relays and LEDs. You can activate connected devices
through the VAPIX® Application Programming Interface or the web interface.
Port
Name: Edit the text to rename the port.
Direction: indicates that the port is an input port. indicates that it’s an output port. If the port is
configurable, you can click the icons to change between input and output.
Normal state: Click for open circuit, and for closed circuit.
Current state: Shows the current state of the port. The input or output is activated when the current state is
different from the normal state. An input on the device has an open circuit when it’s disconnected or when
there is a voltage above 1 VDC.
Note
During restart, the output circuit is open. When the restart is complete, the circuit goes back to the normal
position. If you change any settings on this page, the output circuits go back to their normal positions
regardless of any active triggers.
Supervised : Turn on to make it possible to detect and trigger actions if someone tampers with the
connection to digital I/O devices. In addition to detecting if an input is open or closed, you can also detect if
someone has tampered with it (that is, cut or shorted). To supervise the connection requires additional
hardware (end-of-line resistors) in the external I/O loop.
Logs
Reports and logs
AXIS A8207-VE Mk II Network Video Door Station
To Next Page
Loading...
