83
Connectors
HDMI connector
Use the microHDMI
TM
connector to connect a display or public view monitor.
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
Audio connector
4-pin terminal block for audio input and output.
Function Pin Notes
Line in 1 Line in (mono)
GND 2 Audio ground
Line out 3 Line out
GND 4 Audio ground
Relay connector
8-pin terminal block for solid state relays that can be used in the following ways:
• As a standard relay that opens and closes auxiliary circuits.
• To control a lock directly.
• To control a lock through a safety relay. Using a safety relay on the secure side of the door prevents
hotwiring.
Function Pin Notes Specifications
NO/NC 1 Normally open/normally closed
For connecting relay devices.
The two relay pins are galvanically separated
from the rest of the circuitry.
Max current 1 A
Max voltage 30 V DC
COM 2 Common
24 V DC 3 For powering auxiliary equipment.
Note: This pin can only be used as power out.
Output voltage 24 V DC
Max current 50 mA
1
Max current 350 mA
2
DC ground 4 0 V DC
NO/NC 5 Normally open/normally closed
For connecting relay devices.
Max current 1 A
Max voltage 30 V DC
AXIS A8207-VE Mk II Network Video Door Station
1. When powered through Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3.
2. When powered through Power over Ethernet Plus (PoE+) IEEE 802.3at Type 2 Class 4 or DC power input.
To Next Page
Loading...
