36
Calls
Call button
Use call button: Turn on to make it possible to use the call button.
Button functionality during a call: Select the functionality of the call button once a call has been started
from the device.
• End the call: When a visitor presses the call button during an outgoing call, the call ends. Use this
option to allow visitors to end a call at any time.
• No functionality until the call has ended: When a visitor presses the call button during an outgoing
call, nothing happens. Use this option to prohibit visitors from ending calls.
• Delay before you can end the call: When a visitor presses the call button within the time set in Delay
(seconds) after they have started a call, nothing happens. If the delay time has passed, pressing the
call button ends the call. Use this option to prevent visitors from accidentally ending calls due to
double presses.
– Delay (seconds): Enter the time that must pass before a second press of the call button ends
the call.
Standby light: Select an option for the built-in light around the call button.
• Auto : The device turns the built-in light on and off based on the surrounding light.
• On: The built-in light is always turned on when the device is in standby mode.
• Off: The built-in light is always turned off when the device is in standby mode.
Recipients: Select or create one or more contacts to call when someone presses the call button. If you add
more than one recipient, the call will be placed to all of them at the same time. The maximum number of SIP
call recipients is six, while you can have an unlimited number of VMS call recipients.
Fallback: Add a fallback contact from the list in case none of the recipients replies.
General
Audio
Note
• The selected audio clip is only played when a call is made.
• If you change the audio clip or gain during an ongoing call, it doesn’t take effect until the next call.
Ringtone: Select the audio clip to play when someone makes a call to the device. Use the slider to adjust the
gain.
Ringback tone: Select the audio clip to play when someone makes a call from the device. Use the slider to
adjust the gain.
VMS calls
VMS calls
Allow calls in the video management software (VMS): Select to allow calls from the device to the VMS. You
can make VMS calls even if SIP is turned off.
Call timeout: Set the maximum duration of an attempted call if no one answers.
AXIS A8207-VE Mk II Network Video Door Station
To Next Page
Loading...
