EasyManua.ls Logo

Axis A8207-VE Mk II - Page 35

Axis A8207-VE Mk II
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Server address: Enter the IP address of the SIP proxy server.
Username: If required, enter the username for the SIP proxy server.
Password: If required, enter the password for the SIP proxy server.
Video
View area: Select the view area to use for video calls. If you select none, the native view is
used.
Resolution: Select the resolution to use for video calls. The resolution affects the required
bandwidth.
Frame rate: Select the number of frames per second for video calls. The frame rate affects the
required bandwidth.
H.264 profile: Select the profile to use for video calls.
DTMF
Add sequence: Click to create a new dual-tone multifrequency (DTMF) sequence. To create a rule that is
activated by touch-tone, go to Events > Rules.
Sequence: Enter the characters to activate the rule. Allowed characters: 0–9, A-D, #, and *.
Description: Enter a description of the action to be triggered by the sequence.
Accounts: Select the accounts that will use the DTMF sequence. If you choose peer-to-peer, all peer-to-peer
accounts will share the same DTMF sequence.
Protocols
Select the protocols to use for each account. All peer-to-peer accounts share the same protocol settings.
Use RTP (RFC2833): Turn on to allow dual-tone multifrequency (DTMF) signaling, other tone signals and
telephony events in RTP packets.
Use SIP INFO (RFC2976): Turn to include the INFO method to the SIP protocol. The INFO method adds
optional application layer information, generally related to the session.
Test call
SIP account: Select which account to make the test call from.
SIP address: Enter a SIP address and click to make a test call and verify that the account works.
Access list
Use access list: Turn on to restrict who can make calls to the device.
Policy:
Allow: Select to allow incoming calls only from the sources in the access list.
Block: Select to block incoming calls from the sources in the access list.
Add source: Click to create a new entry in the access list.
SIP source: Type the caller ID or SIP server address of the source.
AXIS A8207-VE Mk II Network Video Door Station

Table of Contents

Related product manuals