Axis A8207-VE Mk II - Reader; Connection

38
Reader
Connection
Reader protocol
Reader protocol type: Select the protocol to use for the reader functionality.
• VAPIX reader: Can only be used with an Axis door controller.
– Protocol: Select HTTPS or HTTP.
– Door controller address: Enter the IP address for the door controller.
– User name: Enter the username of the door controller.
– Password: Enter the password of the door controller.
– Connect: Click to connect to the door controller.
– Select reader: Select the entrance reader for the appropriate door.
• OSDP:
– OSDP address: Enter the OSDP reader address. 0 is the default and most common address for
single readers.
• Wiegand :
– Beeper: Turn on to activate the beeper input.
– Input for beeper: Select the I/O port used for the beeper.
– Input used for LED control: Select how many I/O ports to use for controlling LED feedback on
the device.
– Input for LED1/LED2: Select which I/O ports to use for LED input.
– Idle color: If no I/O port is used to control the LED, you can select a static color to show on
the card reader indicator stripe.
– Color for state low/high: If one I/O port is used for LED control, select the color to show for
state low and state high respectively.
– Idle color/LED1 color/LED2 color/LED1 + LED2 color: If two I/O ports are used for LED
control, select the colors to show for idle, LED1, LED2, and LED1 + LED2 respectively.
– Keypress format: Select how to format the PIN when it’s sent to the access control unit.
– FourBit: PIN 1234 is encoded and sent as 0x1 0x2 0x3 0x4. This is the default and
most common behaviour.
– EightBitZeroPadded: PIN 1234 is encoded and sent as 0x01 0x02 0x03 0x04.
– EightBitInvertPadded: PIN 1234 is encoded and sent as 0xE1 0xD2 0xC3 0xB4.
– Wiegand26: The PIN is encoded in Wiegand26 format with an 8 bit facility code and
a 16 bit id.
– Wiegand34: The PIN is encoded in a Wiegand34 format with a 16 bit facility code
and a 16 bit id.
– Wiegand37: The PIN is encoded in a Wiegand37 format (H10302) with a 35 bit id.
– Wiegand37FacilityCode: The PIN is encoded in a Wiegand37 format (H10304) with a
16 bit facility code and a 19 bit id.
– Facility code: Enter the facility code to be sent. This option is only available for some keypress
formats.
AXIS A8207-VE Mk II Network Video Door Station