Axis A8207-VE Mk II - Pin; Entry List

40
PIN
The PIN settings must match the ones configured in the access control unit.
Length (0–32): Enter the number of digits in the PIN. If users aren’t required to use a PIN when they use the
reader, set the length to 0.
Timeout (seconds, 3–50): Enter the number of seconds that need to pass before the device returns to idle
mode when no PIN is received.
Entry list
With Entry list, you can set up the device to allow credential holders to use their card or PIN to perform
different actions, such as opening a door. You store the credentials locally in the device. You can also combine
this functionality with an external door controller.
Credential holders
Use Entry list: Turn on to use the Entry list functionality.
Use connected door controller: Turn on if the device is already connected to a door controller. If someone
presents a credential that doesn’t exist in Entry list, we’ll send the request to the connected door controller.
We don’t send credentials that are available in Entry list.
Add credential holder: Click to add a new credential holder.
First name: Enter a first name.
Last name: Enter a last name.
Credential type:
• PIN:
– PIN: Enter a unique PIN or click Generate to create one automatically.
• Card:
– UID: Enter the card’s UID and bit length, or click Get latest to fetch the data from the latest
card swipe.
Event condition: Select one or more conditions to trigger when the credential holder uses their credential. To
set up the resulting action, go to System > Events and create a rule, using the same condition you select here.
Valid from: Select Current device time to activate the credential immediately. Clear to specify when to
activate the credential.
Valid to:
• No end date: Credential is valid indefinitely.
• End date: Specify the date and time when the credential becomes invalid.
• Number of times: Specify how many times the credential holder can use the credential. The value in
the field reduces as the credential is used, to show the remaining uses.
Notes: Enter optional information.
Suspend: Select to make the credential temporarily invalid.
Event log
The event log shows a list of entry list events. The maximum size of the log file is 2 MB, which equals
approximately 6000 events.
AXIS A8207-VE Mk II Network Video Door Station