33
• UDP-to-TCP switching: Select to allow calls to switch transport protocols from UDP (User Datagram
Protocol) to TCP (Transmission Control Protocol) temporarily. The reason for switching is to avoid
fragmentation, and the switch can take place if a request is within 200 bytes of the maximum
transmission unit (MTU) or larger than 1300 bytes.
• Allow via rewrite: Select to send the local IP address instead of the router's public IP address.
• Allow contact rewrite: Select to send the local IP address instead of the router's public IP address.
• Register with server every: Set how often you want the device to register with the SIP server for the
existing SIP accounts.
• DTMF payload type: Changes the default payload type for DTMF.
• Max retransmissions: Set the maximum number of times the device tries to connect to the SIP server
before it stops trying.
• Seconds until failback: Set the number of seconds until the device tries to reconnect to the primary
SIP server after it has failed over to a secondary SIP server.
Accounts
AXIS A8207-VE Mk II Network Video Door Station
To Next Page
Loading...
