USER MANUAL 59
__________________________________________________________________________________________________________________
18.13 Density determination (dEnSItY)
Solids density determination
This function calculates material density
basing on its weight in air and in water using
the formula below:
where, m
1
– weigh in air
m
2
– weight in water
L
- density of liquid
If distilled water (H
2
O) or ethanol (EthAnOL)
is used, enter its exact temperature (accurate
to 0,5°C) – the balance will calculate its
density automatically.
To enter the value use the following keys:
- digit increase,
- decimal point,
T - next digit,
MENU - end.
When using liquid other than distilled water or
ethanol, choose OTHER option and enter its
density according to its temperature.
Phase I: measurement in air.
Phase II: measurement in liquid.
To print measurement result and begin next
measurement press key.
To Next Page
Loading...
