USER MANUAL 61
__________________________________________________________________________________________________________________
Liquid density determination
This function determines liquid density basing
on plunger weight in air and in examined
liquid with known volume, using the formula
below:
where
m
1
– plunger weight in air
m
2
– plunger weigh in a liquid
V – plunger volume
Plunger volume is stored on its hanger.
To enter the value use the following keys:
- digit increase,
- decimal point,
T - next digit,
MENU - end.
Phase I: measurement in air.
Phase II: measurement in liquid.
To print measurement result and begin next measurement press key
To Next Page
Loading...
