BATTERY PACK AND CHARGING
~ 56 ~
Your vehicle is equipped with a standard charge receptacle (J1772). The baery charge
receptacle is located on the driver’s side of the vehicle behind the access door.
Using an incorrect or damaged charging cable could result
in fire, heat damage or charger failure, which could result
in serious injury or death. Always use UL-listed and/or
ETL-listed cables and charging staons for EV charging
(whether hard-wired or portable) to charge the baeries.
Charging from a circuit of lesser capacity and/or using an under-sized
cable from the outlet to the vehicle could create a fire hazard.
Do not work in or near the baery compartment or on any other electrical
component of the vehicle while charging the baeries.
Please contact your authorized AYRO Dealer for service requirements
involving the vehicle’s electrical/baery systems. If you are not authorized
to service your vehicle, please do not aempt. Always allow trained
personnel to properly manage the electrical/baery systems.
HIGH BATTERY VOLTAGE IS ALWAYS PRESENT.
DO NOT TOUCH THE BATTERY TERMINALS.
open the high-
voltage baery
compartment.