AYRO VANISH - Lights; Headlight Replacement; Front;Rear Turn Signal and Brake Light Replacement; Battery Replacement

MAINTENANCE
~ 74 ~
14.14 Lights
Poor lighng can result in reduced visibility when driving. Clean light lenses frequently and
replace non-funconing lights promptly. Always make sure lights are operaonal and adjusted
properly for best visibility.
14.14.1 Headlight Replacement
If a headlight fails to work properly, the assembly must be replaced. Your authorized AYRO Dealer
can provide service.
14.14.2 Front/Rear Turn Signal and Brake Light Replacement
If a rear LED light fails to work properly, the assembly must be replaced. Your authorized AYRO
Dealer can provide service.
14.15 Baery Replacement
The main EV Baery replacement must be performed by your authorized AYRO Dealer or Service
Center, and technicians must be trained and AYRO-authorized.
The 12-volt baery is user-replaceable. It controls low-voltage funcons cabin funcons (most
accessories in the cabin, but not the heater).
14.16 Storing Your AYRO Vanish
Any me the vehicle will be parked for more than 10 days, follow the recommended storage
procedures:
• Make any necessary repairs and clean the vehicle.
• Prepare the baeries for storage.
Baeries can be permanently damaged (and the warranty voided) if
allowed to remain 30 days or more with low charge. Fully charge baeries
before storing. In hot climates, baery self-discharge will increase. In cold
climates, baeries could freeze if not properly charged. Charging will
warm the cold baeries.
• Store the vehicle out of the sun in a cool, dry place.
• Ensure the storage area is well venlated.
• Turn the key « OFF ».
• Verify re pressure is at specificaon (20 psi). Tires are factory filled with nitrogen.
• Chock the wheels to prevent rolling.