AYRO VANISH - Battery Performance Tips; On-Board Charger; Preparation for Charging the Batteries

BATTERY PACK AND CHARGING
~ 55 ~
11.4 Baery Performance Tips
During winters with temperatures below freezing, an EV can lose as much as 30% of driving
range due to very cold weather. Plug it in to keep the baery warm and maximize range.
Do not discharge the baery too low as this increases the internal resistance. Plug it in to
maintain a state of charge above 50%.
Ensure that res are properly inflated as this will reduce the rolling resistance and improve
handling, range, and re wear.
Range may be affected by road condions, payload, terrain, temperatures, and driving habits.
11.5 On-Board Charger
The on-board baery charger receptacle is located behind the driver side panel. The state of
charge of the baeries is displayed in the vehicle’s Driver Display.
When the vehicle will not be used for an extended period, plug the charging cable into the
charging receptacle. The on-board charger will monitor the state of charge of the baeries, and
charging will be inialized automacally when needed. This will opmize charging performance
and maintain the baery at an opmal condion during storage.
IMPORTANT: Avoid temperature extremes when choosing a storage area.
Protecve safety features in the on-board charger will not allow the charger to acvate if the
input power is over or under an acceptable range. If this occurs, please check that the vehicle is
properly plugged into a standard 115 V (20 A) or 220 V receptacle using the provided charging
cable and that the connecon is solid.
11.6 Preparaon for Charging the Baeries
• Standard Charge Receptacle (J1772)
• When charging the vehicle, always use a safety-cerfied cable or cable from a public
charging staon.