AYRO VANISH - Removal from Storage; Battery Disposal; Cleaning Tips

MAINTENANCE
~ 75 ~
If the vehicle is not going to be connected to the charger for an extended
period, please contact your authorized AYRO Dealer for assistance. Cover
the vehicle with a breathable vehicle cover. Do not use plasc or coated
materials. They do not allow enough venlaon to prevent condensaon
and may promote corrosion and oxidaon.
14.17 Removal from Storage
• Inspect all baery connecons. Please contact your authorized AYRO Dealer for
assistance with electrical and/or baery servicing. Verify that baeries are fully charged
aer long storage.
• Verify that re pressure is at specificaon.
• Perform the pre-ride inspecon. See page 60.
• Inspect and verify the ghtness of the bolts, nuts, and other fasteners.
Storage Period
Charging Procedure
Less than 10 days
Fully charge the baeries, park the vehicle, and turn the ignion key «
OFF
». The baery will lose some of its charge during this period.
10 days to
6 months
Leave the charger connected.
Indefinitely or
Unknown
Please contact your authorized AYRO Dealer for servicing which may
involve disconnecng the charger and arranging for monthly charging.
14.18 Baery Disposal
Contact your local and/or state environmental officials regarding disposal informaon. You can
also contact AYRO Customer Service for informaon. See page 15.
14.19 Cleaning Tips
Always test cleaning products on an inconspicuous area of the intended surface prior to use.
Be very careful when cleaning plasc surfaces as they can be scratched or
damaged. Do not use a cleaner with an abrasive, a combinaon cleaner
and wax, or any aggressive solvents. Do not use products containing
ammonia, soaps, or abrasives.