Aztech 4-Port Wireless N Router User Manual

User Manual
Setup the Device
When installing the router, find an area where there are enough electrical outlets for the
router, the main computer, and your other computer devices.
To setup the router:
a. Use an Ethernet cable to connect a modem to the WAN port.
b. Use an Ethernet cable to connect a computer to any of the available Ethernet
ports from 1-4.
c. Connect the power adapter and then plug it to an electrical source.
Page 14 of 57

Aztech 4-Port Wireless N Router Specifications

General

Brand	Aztech
Model	4-Port Wireless N Router
Category	Network Router
Language	English