User Manual
Wireless
Basic Settings
Your wireless settings will impact the coverage and the performance of your wireless
LAN.
The wireless settings allow you to set the following configuration items:
Disable Wireless LAN Interface Select this check box to disable the wireless Radio.
Country/Region Select the Country domain from drop-down list.
Wireless Mode You may select the Mode from the drop-down list. The option is AP, Bridge, and AP with
Repeater.
Wireless Network Name (SSID) Network ID is used for identifying the wireless LAN (WLAN). Client stations
can roam freely using this product and other Access Points that have the same Network ID. (The factory
setting is “aztech”.)
Broadcast SSID Enabled by default. When enabled, broadcasts the SSID publicly. When disabled, users must
specify the correct SSID to be able to connect to your network.
802.11 Mode The AP can be operated in two different bandwidth scenarios:
• 802.11b/g Mode A mixed network in which high rate and low rate devices share the same
wireless medium. This mode offers the advantage of full backward compatibility with 802.11b
Page 33 of 57
To Next Page
Loading...
Need help?
General
