Aztech 4-Port Wireless N Router User Manual

User Manual
IP Filtering
IP Filtering gives you the ability to block access to IP addresses that you specify.
Select Enable IP Filtering to activate this setting. Clear this check box to disable it.
Enter the Local IP Address that you want to filter and select Protocol from the drop-down
list box. After you fill in the settings, click Apply Changes to save the settings. Click Cancel
to start configuring this part of the screen again.
Page 47 of 57

Aztech 4-Port Wireless N Router Specifications

General

Brand	Aztech
Model	4-Port Wireless N Router
Category	Network Router
Language	English