Aztech 4-Port Wireless N Router User Manual

User Manual
MAC Filtering
The MAC filter allows you to configure the device to exclude other devices from accessing
the router. Every Ethernet device has a unique MAC address. The MAC address is assigned
at the factory and consists of six pairs of hexadecimal characters, for example, 00-60-B3-
00-00-02. You need to know the MAC address of the devices to configure this screen.
Select Enable MAC Filtering to activate this setting. Clear this check box to disable it.
Enter the MAC Address that you want to filter and fill in the comment, click Apply
Changes to save the settings. Click Cancel to start configuring this part of the screen
again.
Page 48 of 57

Aztech 4-Port Wireless N Router Specifications

General

Brand	Aztech
Model	4-Port Wireless N Router
Category	Network Router
Language	English