Aztech 4-Port Wireless N Router User Manual

User Manual
Port Filtering
The Port Filtering gives you the ability to block access only the port that you specify.
Select Enable Port Filtering to activate this setting. Clear this check box to disable it.
Enter the Port Range that you want to filter and select Protocol from the drop-down list
box. After fill in the settings, click Apply Changes to save the settings. Click Cancel to start
configuring this part of the screen again.
Page 50 of 57

Aztech 4-Port Wireless N Router Specifications

General

Brand	Aztech
Model	4-Port Wireless N Router
Category	Network Router
Language	English