User Manual
PPTP
Use Point To Point Tunneling Protocol (PPTP) if your ISP uses a PPTP connection. Your ISP
will provide you a username and password.
IP Address and Subnet Mask The private IP address and subnet mask that your ISP assigned to you.
Server IP Address The IP address of the PPTP server.
Username and Password The account and password that your ISP assigned to you. If you don't want to
change the password, leave the field empty.
MTU Size Change the MTU size that your ISP provided. The default value is 1400 and range is 1400 to 1460
bytes.
Request MPPE Encryption If you need to use MPPE Encryption, you can select it.
Enable uPNP: You can select it according to your request.
Enable IPsec/PPTP/L2TP pass through on VPN connection Check the protocol for your VPN
Page 29 of 57