User Manual
devices. This is quite essential for those applications that have significant stocks of legacy 11b
equipment installed and want a smooth migration path to higher data rates for users.
• 802.11n/g Mode A mixed network in which 802.11g and 802.11n device share the same wireless
medium.
Channel Number The permissible radio channels range from channel 1 to 13 (default is 6), depending on
the regulatory domain. For restrictions please refer to the first page of this manual.
Output Power
Set the transmit signal strength of the access point. The options are Full, 50%, 25%,
12.5% and min. Decrease the transmit power if necessary. The default is “Full”.
Data Rate The basic transfer rates should be set depending on the speed of your wireless network. Specify
rate of data transmission. Select the desired rate from the drop-down menu and choose “Auto” to adapt
the rate to the best available.
Channel Mode Specify the wireless channel bandwidth mode. Select 20MHz to set the device to transmit at
up to 20MHz to other wireless device (including draft-N compatible wireless devices). Select 40MHz to set
the device to transmit at up to 40MHz to other wireless device. Select 20/40MHz to set the device to
automatically switch between 20MHz and 40MHz operation.
Extension channel protection mode Extension channel protection mode is the protocol feature the gives
802.11n compatibility with older 802.11g equipment.
Page 34 of 57
To Next Page
Loading...
Need help?
General
