Badger Meter Dynasonics TFX-500w User Manual

Display Menu
Requires operator level passcode or higher if security is enabled. An asterisk (*) indicates the parameter default.
Display Submenus Options/Descriptions
LANGUAGE
*ENGLISH English
DEUTSCHE German
ESPAÑOL Spanish
FRANÇAIS French
ITALIANO Italian
DECIMAL
#.#
#,#
Select whether the decimal indicator is a period or a comma.
DISPLAY TAG ID
*DISABLED
ENABLED
Displays the TAG ID on the Home Screen. Default is TFX-5000.
Use SoloCUE to change the TAG ID.
BRIGHTNESS Select the display brightness 10…100% in increments of 10. Default is 70%.
CONTRAST Adjust the screen contrast 12…37. Default is 24.
DIMMER
*ENABLED
DISABLED
Enable the DIMMER to reduce the display BRIGHTNESS after the buttons are not
pressed for the TIMEOUT period. Select the BRIGHTNESS level. Default is 10%.
Press any button to awaken the transmitter and return to normal BRIGHTNESS. The
buttons pressed will not be active for one second after the transmitter is awakened.
DIMMER LEVEL
OFF
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
TIMEOUT
5 MINUTES
*10 MINUTES
20 MINUTES
30 MINUTES
60 MINUTES
SET TIME Numeric entry for 24 hour clock HH:MM
SET DATE Numeric entry for date YYYY-MM-DD
DISPLAY TIME
24 HOUR
AM / PM
Select format of the time to display on the home screen and on SoloCUE
dashboard.
DISPLAY DATE
YYYY-MM-DD
MM-DD-YYYY
DD-MM-YYYY
Select format of the date to display on the home screen and on SoloCUE
dashboard.
Information Menu
An asterisk (*) indicates the parameter default.
Information Submenus Options/Descriptions
VENDOR BADGER METER
MODEL TFX-5000
P.N.: Badger Meter part number
S.N. Serial Number
FW VERSION Firmware Version xx.xx.xxx
CAL. DATE Calibration Date YYYY-MM-DD
DATE CODE Manufacture Date YYYY-MM-DD
TAG ID 16 characters
Parameter Descriptions by Menu
Page 41 October 2019 TTM-UM-02222-EN-04

Badger Meter Dynasonics TFX-500w Specifications

General

Brand	Badger Meter
Model	Dynasonics TFX-500w
Category	Measuring Instruments
Language	English