Bailey INFI 90 IMCOM03 - Switch S2;S3 Analog Output Switch

INSTALLATION
SETUP
3 - 4 I-E96-207A
®
2 X Goes to power up value set by SW2-1 on
time out.
3X
4, 6 X Yields voltage output.
5X
4, 6 X Yields current output.
5X
Analog Output Number 2 Switch S3
Switch
Position
Open
(1 - off)
Closed
(0 - on)
Function
1 X Yields 5.25 VDC output for power up.
X Yields 0.75 VDC output for power up.
2 X Holds last analog output value on time
out.
3X
2 X Goes to power up value set by SW3-1 on
time out.
3X
4, 6 X Yields voltage output.
5X
4,6 X Yields current output.
5X
Figure 3-2. Switch S2/S3 Analog
Output Switch
Table 3-1. Switch S2/S3 Analog Output Settings
(continued)
Analog Output Number 1 Switch S2
Switch
Position
Open
(1 - off)
Closed
(0 - on)
Function
1 2 3 4 5 6
OPEN
OFF = OPEN = LOGIC 1
ON = CLOSED = LOGIC 0
T00114A