Baldor MicroFlex e100 - D.1.7 Wiring of Shielded (Screened) Cables

www.baldormotion.com
CE & UL C-5MN1942
D.1.7 Wiring of shielded (screened) cables
Remove the outer insulation
to expose the overall shield.
Clamp should provi de 360°
contac t with the cabl e.
Flat or p-type
conduc tive clamp
Figure 62 - Earthing/grounding cable shields
1
9
2
10
3
11
12
13
MicroFlex e100
X8
Encoder Connector
Housing
Cable
Twisted pairs
Connect overall s hield
to c onnec tor backshell.
Connect overall s hield
to c onnec tor backshell.
CHA+
CHA-
CHB+
CHB-
CHZ+
CHZ-
+5 V
DGND
Figure 63 - Encoder signal cable grounding