Index
MN1942
EnDat, cable, A-12
EnDat (absolute) encoder
cable, 4-14
feedback, 4-13
specification, 8-6
Environmental
cooling, 3-3
location, 3-3–3-4
specification, 8-7
Ethernet connector, 5-18
Ethernet interface
cables, A-12
connector, 5-18
ETHERNET Powerlink, 5-17
introduction, 5-16
LEDs, 7-4
specifications, 8-6
TCP/IP, 5-16
F
Fast position capture, 5-8
Features, 2-1
Feedback
BiSS, 4-7
cable, A-10–A-13
connections, 4-1
encoder without Halls, 4-4
EnDat (absolute), 4-13
Halls-only feedback, 4-4
incremental encoder, 4-2
SinCos, 4-11
SSI, 4-9
Filters
24 V control circuit supply, 3-17
AC power (EMC), 3-16, A-4
catalog numbers, A-4
Footprint filter , A-3
Fuses, 3-15
G
General Information, 1-1
Grounding. See Earthing (grounding)
H
Hardware requirements, 3-1
Help file, 6-9
I
Incremental encoder
cable, 4-3, A-11
feedback, 4-2
specification, 8-5
without Halls, 4-4
Indicators
CAN LEDs, 7-3
ETHERNET LEDs, 7-4
STATUS LED, 7-2
Input / Output, 5-1
CAN interface, 5-19
connection summary, 5-25
digital input DIN0, 5-5, 8-4
digital inputs DIN1 & DIN2, 5-7, 8-4
digital output DOUT0, 5-10, 8-4
digital output DOUT1, 5-12, 8-4
drive enable input, 5-3, 8- 4
encoder interface, 4-1
Ethernet interface, 5-16
node ID selector switches, 5-22
RS485 port, 5-14
serial port, 5-14
USB port, 5-14
Installation
See also Basic Installation
cooling, 3-5–3- 8
dimensions, 3-4
mechanical, 3-3
Mint Machine Center , 6-1
Mint WorkBench, 6-1
mounting, 3-5
TCP/IP configuration, 6-4
USB driver, 6-3
K
Keyword summary , C-1
L
LED indicators
CAN LEDs, 7-3
ETHERNET LEDs, 7-4
STATUS LED, 7-2
LED status indicator, 7-2
Linear motor, cable configuration, 4-6
To Next Page
Loading...
