www.baldormotion.com
Mint Keyword Summary C-5MN1901
Keyword Description
CAPTURENUMPOINTS To read the number of captured points per channel.
CAPTUREPERIOD To define the interval between data captures.
CAPTUREPOINT To allow individual capture values to be read.
CAPTUREPOINTINTEGER To allow individual capture values to be read as integer
values.
CAPTUREPRETRIGGER-
DURATION
Sets the duration of the pre-trigger phase.
CAPTUREPROGRESS Returns the progress of the pre-trigger or post-trigger
capture phase.
CAPTURESTATUS Returns the progress of the capture.
CAPTURETRIGGER To generate a capture trigger.
CAPTURETRIGGERABSOLUTE To ignore the sign of the trigger value when triggering
from a capture channel source.
CAPTURETRIGGERCHANNEL Sets the channel to be used as the reference source for
triggering.
CAPTURETRIGGERMODE Sets the method used to evaluate the trigger source.
CAPTURETRIGGERSOURCE Sets the reference source to be used for triggering.
CAPTURETRIGGERVALUE Sets the trigger value when triggering from a capture
channel source.
COMMISSIONED To set or read whether the axis/drive has been
commissioned.
COMMS Accesses the reserved comms array.
COMMSINTEGER Accesses the reserved comms array, storing values as
integers.
COMMSMAPDATATYPE To define the data type of a comms element.
COMMSMAPMODE To set or read the comms mapping for a comms
element.
COMMSMAPPARAMETER To set or read the associated parameter for a mapped
comms element.
COMMSMODE Selects comms use over either RS485 or CANopen.
CONFIG To set the configuration of an axis for different control
types.
CONNECT To enable a connection between two remote nodes to be
made or broken.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
