Baldor NextMove ESB-2 User Manual

MN1957 Basic Installation 3-3
www.baldormotion.com
3.1.3 Other requirements for installation
The components you will need to complete the basic installation are:
 The NextMove ESB-2 requires +24 V power supply capable of supplying 2 A
continuously. It is recommended that a separate fused 24 V supply is provided for the
NextMove ESB-2, with the fuse rated at 4 A maximum. If digital outputs are to be used, a
supply will be required to drive them - see section 4.3.2.
 A PC that fulfils the following specification:
 A USB cable (supplied), or RS485/422 serial cable (not supplied).
 The PC operating system user manual, if you are not familiar with Windows.
Minimum specification Recommended specification
Processor Intel PentiumIII
500 MHz
Intel PentiumIII / 4 or equivalent
1 GHz or faster
RAM 128 MB 1 GB
Hard disk space 50 MB 50 MB
CD-ROM A CD-ROM drive
Communication USB port or RS232 / RS485/422 serial port
Screen 1024 x 768, 16-bit color 1152 x 864, 16-bit color
Mouse A mouse or similar pointing device
Operating
system
Windows 2000, Windows XP or Windows Vista
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ,
07045-0097 • (973) 335-1007 • Toll Free: (800) 922-1103
Fax: (973) 335-1661 • www.servosystems.com

Baldor NextMove ESB-2 Specifications

General

Brand	Baldor
Model	NextMove ESB-2
Category	Controller
Language	English