ALPHA 2 Pro™ Wave Operator’s Instruction Manual
10 MKT-AH-1CC40ST [A]
Opening and Closing Doors
Use the following instructions to ensure safe and correct
operation of door equipment:
• Secure doors with locks installed according to instructions
from your lock manufacturer.
• Inspect door latches, brackets, pins, hinges, and gas springs
(if applicable) for wear or damage, and replace, if necessary.
• When opening and closing doors, always hold or support
doors and use the provided latch release mechanisms,
handles, or knobs.
• When closing doors always ensure the door frame areas are
free of foreign objects and the door closes and latches
securely. Do not apply excessive force.
• To avoid damaging latches when closing, always use the
door handles or knobs to hold latches in the open position,
close the door, and then release the handle or knob gently.
(For applicable doors.)
Accessing the Middle Door
STEP 1. To open the middle door, turn the bottom right lock of
the door counterclockwise and lower the door.
STEP 2. To close the middle door, raise the middle door until
the door connects to the cabinet frame securely.
MKT-AH-1CC40ST.book Page 10 Friday, November 15, 2013 3:47 PM
To Next Page
Loading...
