ALPHA 2 Pro™ Wave Operator’s Instruction Manual
MKT-AH-1CC40ST [A] 13
Accessing the Deck Door
STEP 1. To open the deck door, unfasten two screws located
under the iDeck using a Phillips head screw driver and
save the screws for future use.
STEP 2. To close the deck door, align the holes of the deck
door and the cabinet.
STEP 3. Secure the deck door to the cabinet with two screws
previously removed.
CAUTION
The deck door is not attached to the cabinet. To
prevent injury or damage, hold the center of the
security panel firmly.
MKT-AH-1CC40ST.book Page 13 Friday, November 15, 2013 3:47 PM
To Next Page
Loading...
