ALPHA 2 Pro™ Wave Operator’s Instruction Manual
MKT-AH-1CC40ST [A] 23
Installing the Machine
STEP 1. Ensure the new location has appropriate power and
network cabling installed.
STEP 2. Use the instructions provided by your lock
manufacturer to install locks in appropriate areas.
(Machine configurations may vary.)
• top box door
•button deck
• external bill acceptor door
• bill acceptor cash box door
• bill acceptor cash box access door
• lower door
• quick-drop door (if selected)
• logic door (CPU and flash media card)
STEP 3. Move the machine to the desired location using a
lifting or moving device, such as a hand truck.
NOTE
Changes in floor configuration may require
reconfiguring and rerunning of new power and CAT-5
cables.
CAUTION
The machines are heavy. To prevent injuries and
damage always wear a back brace, work with a
partner, and do not use the tower light to move
the machine. To move the machine easily over a
carpeted area, use a hand truck with solid tires, not
air-filled.
MKT-AH-1CC40ST.book Page 23 Friday, November 15, 2013 3:47 PM
To Next Page
Loading...
