Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx Page 11 / 39 Date: 31/03/2020
The battery compartment of the hand-held transmitter is located on the back behind the belt clip. The belt clip
indicates whether it is a hand-held transmitter with batteries or accumulators. On hand-held transmitters with
accumulators there is a stylised plug symbol in the battery symbol.
To change the batteries or accumulators, the screws (1) must be loosened with an Allen key SW 2.0. Now
the belt clip, the holderplate and the battery compartment cover can be removed. The hand-held transmitter
must be assembled in the reverse order after the replacement.
To ensure that the hand-held transmitter functions optimally and reaches the maximum operating time,
we recommend the VARTA Industrial 4003 Micro battery (Mat.-No. 200009395) and the ANSMANN
maxE NiMH battery - 1.2 V - 800 mAh (Mat.-No. 200008090) as an accumulator.
To Next Page
Loading...