bar SmartControl 2.0 - 1 General; Explanation of Symbols

Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx Page 3 / 39 Date: 31/03/2020
1 General
1.1 Explanation of symbols
Symbols are used to simplify the use of this operation manual.
 Action steps are marked with this symbol. Carry out the action steps in the specified order.
 The action result or the reaction of the product to an action is represented by this symbol.
 Lists without a mandatory sequence are displayed as a list with this bullet character.
Symbol
Meaning
To perform the action described, the hand-held transmitter must be located in the reduced
near field of the system.
To perform the action described, the hand-held transmitter must be located in the near field
of the system.
To perform the action described, the hand-held transmitter must be located in the working
field of the system.
To perform the action described, the hand-held transmitter must be located in the receiving
field of the system.
Press pushbutton briefly 1 x.
Press pushbutton briefly 2 x.
Press pushbutton briefly 3 x.
Press pushbutton briefly 4 x.
Press pushbutton briefly and hold it down on the second press.
Press and hold down the pushbutton.
Hold the pushbutton for at least the specified time value x.
Hold the pushbutton.
The hand-held transmitter must be located in the docking station to perform the described
action.
Bär specifications
Symbol for Bär-specific notes / background information on Bär technology / Cargolifts.
Information
Wherever you see this note, you will find useful information for safe and trouble-free
operation of the product.
Stop!
This note refers to possible violations of legal or normative regulations.
rna
na
wa
fa
1x
2x
3x
4x
2x+h
1x+h
h > x
+ h