bar SmartControl 2.0 - Bär Smartcontrol 2.0 Hand-Held Transmitter

Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx Page 10 / 39 Date: 31/03/2020
3.4 Bär SmartControl 2.0 hand-held transmitter
The hand-held transmitter is available in the following options:
Classic Batt hand-held transmitter
Mat. no.: 200008452
Plus Batt hand-held transmitter / Plus accumulator
Mat. no.: 200008454 / Mat. no.: 200008469
Button
Designation
Description
Display
Various information is output via the display. The functions are
described in section 3.5 Display indicators.
Stop
pushbutton
Safe shutdown of the Cargolift
Lift
- Activates the “Lift” function
- Corresponds to the number 1 when entering the code
Close
- Activates the “Close” function
- Activates the “Drive In” function*
- Corresponds to the number 2 when entering the code
Lower
- Activates the “Lower” function
- Corresponds to the number 3 when entering the code
Open
- Activates the “Open” function
- Activates the “Drive Out” function*
- Corresponds to the number 4 when entering the code
Function
pushbutton
- Activates the “RadioKey” function
- Activates the “Option functions” sub-menu*
4-function
pushbutton
- Enables the “Close” and “Open” functions in the horizontal
position
- Switches between the “Close/Drive In” and “Open/Drive Out”
functions*
Truck
pushbutton
- Pairs the hand-held transmitter with Cargolift 1
- Logs the hand-held transmitter in to Cargolift 1
- Logs the hand-held transmitter out of Cargolift 1
Trailer
pushbutton
- Pairs the hand-held transmitter with Cargolift 2
- Logs the hand-held transmitter in to Cargolift 2
- Logs the hand-held transmitter out of Cargolift 2
*Function only available on the Plus Batt hand-held transmitter and the Plus accumulator hand-held transmitter.