bar SmartControl 2.0 - 7 Operation; Logging in; Hand-Held Transmitter

Operation manual
Bär SmartControl 2.0
40000001186_EN_03.docx Page 27 / 39 Date: 31/03/2020
7 Operation
7.1 Logging in
7.1.1 Hand-held transmitter
Entry
Display
Description
The following prerequisites apply for logging in:
- The hand-held transmitter is paired with the system.
- The hand-held transmitter is located in the near field.
- No other hand-held transmitter is logged in to the system.
- The hand-held transmitter is not located in the docking
station.
The system is built into the truck:
 Press “Truck” pushbutton briefly 2 x.
 The green LED and red LED under the truck symbol
illuminate dimly.
 If logging in is successful:
The green LED and red LED under the truck symbol
illuminate brightly.
 Control voltage on Cargolift is switched on.
The system is built into the trailer:
 Press “Trailer” pushbutton briefly 2 x.
 The green LED and red LED under the trailer symbol
illuminate dimly.
 If logging in is successful:
The green LED and red LED under the trailer symbol
illuminate brightly.
 Control voltage on Cargolift is switched on.
na
2x
2x