To avoid crushing and pinching points, the operator
must comply with the following safety distances
whilst operating the Cargolift:
Body side:
Min. 250 mm from the end of the body
Road surface side:
Min. 1 m from the platform
In order to avoid endangering yourself and others,
the movement area of the Cargolift must be watched
constantly. Particular attention should be paid to the
crushing and shearing points between the platform
and the body, as well as between the platform and
the road surface.
Note!
Marking
The marking (e.g. yellow/black) for the safety
distance at the end of the body must be applied by
the body builder.
Otherwise, the operator can be assigned an
operating position through the marking of footprints if
necessary.
To Next Page
Loading...