Page 19
(b) Where applicable for two adjacent Barbeques only, bolt the fireboxes together
WHAT YOU NEED
Two M6*60mm Screws
Four M6 Washers
Two M6 Nuts
Two Spring Washers
Join the two heads using Two sets M6*60mm screws, M6 Washers and Nuts as shown
below (carts not shown for clarity, but they should already be levelled and joined).
Washers
Screws
Spring
Washers
Washers
Nuts
Two M6 Screws Four M6 Washers Two M6 Nuts Two Spring Washers
Cutawa
view from front:
Assembly instructions (continued)
To Next Page
Loading...
