Page 23
STEP 12 (FOR ALL MODELS: Position the cooking grill and hotplate
WHAT YOU NEED
2B One cooking grill and one hotplate
4B Two cooking grills and one hotplate
6B Two cooking grills and one hotplate
Place the Cooking Grill(s) on the upper support shoulder in the firebox as shown. Position
the cooking grill(s) above the flame tamer or ceramic tiles. There is no need to place flame
tamers or ceramic tiles underneath the hotplate. Position the Hotplate on the upper support
shoulder in the firebox as shown Depending on the configuration you may need to align the
tabs on the side of the hotplate with the gaps in the side of the cooking grills. The hotplates
are deliberately designed to try and prevent using too much hotplate. Too much hotplate
can overheat the bbq, and possibly dangerously damage some components. Using too
much hotplate voids the barbeque warranty. NEVER use more hotplate than originally
supplied with the barbeque, except for the 6B, it is OK to add one extra piece. Maximum
hotplate limits: 2B: half of the primary cooking surface; 4B: half of the primary cooking
surface; 6B two thirds of the primary cooking surface.
STEP 13 (FOR ALL MODELS): Position the warming rack
The extendable Warming Rack hooks onto the side windshield and into the locating holes
in the windshield back panel. If you have a cart, the warming rack can hook onto the
back of the cart for storage when not required.
Assembly instructions (continued)
To Next Page
Loading...
