Page 13
If you are assembling a cart model or steel island, make sure you have the separately
supplied steel cart (code MC2BV or MC2DXB for 2 burner, code MC4BV or MC4DXB
for 4 burner, code MC6BV or MC6DXB for 6 burner). Assemble the cart(s) before you
start on the barbeque head assembly using the instruction manual supplied separately
with the cart.
If you are assembling multiple units together (e.g. 2 burner and a 4 burner and a Range
unit to make one bbq island), assemble each of the bbqs / heads to their respective carts
before joining the carts.
If you are fitting side shelves and / or side burners, make sure you have the separately
supplied pack of two folding shelves (code MCBFOLDV) or pack of one Premium shelf +
one stainless steel side burner (code MCBSBSHELFV) or pack of one Deluxe shelf + one
cast iron side burner (code MCDXBSBSHELFV).
If you are assembling a build-in or an island, make sure you have the separately supplied
build-in kit (code BRBIKV). Double check all dimensions and clearances before committing
to any design or construction expense.
If you purchased a pre-fabricated island, verify that you have matching size island and
barbeque head, and assemble the island before you start on the barbeque head assembly.
If you want to run up to two adjacent gas modules (e.g. 2 burner and 4 burner) from a single
gas supply, you will need separately supplied corrugated gas extension pipe (code:
CBGASEXT). Check with a gasfitter before connecting multiple items from the one gas
supply to ensure it can be done safely.
Assembly instructions
To Next Page
Loading...
